Wondering how to put pegs on your mountain bike? There are so many different kinds of mountain bikes out there, and you’ve finally found one that fits your budget!
But it still doesn’t have pegs. How do you go about putting them on? What are the right tools for the job? And what safety precautions should you take? Read this article for answers to these questions and more.
What Are Pegs?
Pegs are footrests that you attach to your mountain bike to help you keep your feet on the ground and to keep your balance. They’re often shorter than the actual footrests found on some bikes.
Moreover, they’re generally made of strong metal, and you set them on top of the wheels, one on each side.
Different types of pegs sometimes vary in design. For example, some are made of plastic, while others are made of rubber.
The pegs are usually held to the bike by a metal ring. Some footrests have bolted. And others have clamps. This is why it’s important to check your bike’s design carefully before you buy the pegs.
Wondering How to Put Pegs on Your Mountain Bike?
To illustrate the concept, let’s look at the process of putting pegs on a mountain bike.
1. If you have clamps, you will need to lift the back tire off the ground. You can do this by leaning the bike against a wall or fence. Then, you will need to loosen the nuts on the back tire.
2. Once the nuts are loose, you can remove the back tire. There will be two nuts, one on each side of the back tire. These will be located below the seat, between the seat and the back tire.
3. Next, you will need to find the holes in the frame of your bike where the pegs will attach. You will need to take the pegs you have purchased and then look down to where the seat and the frame meet. There will be a hole in the frame that the peg will fit into.
4. Now you will need to insert the peg into the hole of your frame. Make sure that you have the correct peg for your bike. There will be a peg for a mountain bike, and a peg for a road bike.
5. While the back tire is off the bike, you will need to clean the area where the back tire sits. You will do this with a rag, and some solvent. This will allow the tire to sit on the bike without any interference.
6. When you tighten the back tire, you will want to be careful. If it is too tight, it could cause the tire to pop off the back of the bike, and it will be difficult to put on. It is better to have the tire too loose than too tight.
7. Once the back tire is on, you can put the seat back on the bike. Then you will be able to ride with your two new pegs.
8. When you are finished, you need to take your bike for a test ride. There is always the chance that you will need to make a small adjustment.
Moreover, it is always a good idea to check the pegs every time you ride. This will ensure that they are in the correct position.
How to Choose the Right Peg for Your Mountain Bike?
On the contrary, there are a variety of pegs out there. Therefore, you should be careful when choosing a mountain bike peg. Here are some features to help you find the right mountain bike pegs.
Choose the right color to match the rest of your bike. It is good to know that you can also paint most pegs.
This can give you the option of choosing a color that is bolder. Color can also help you spot your bike after a ride, so choose one that stands out.
Measure your mountain bike’s axle diameter. The diameter is a measurement around the axle. This is the diameter to be used when choosing the right size of your desired peg.
Of course, it is important to ensure that the pegs you choose have the same outer diameter as your axle.
The material of your peg will decide the kind of traction it offers. All-purpose rubber is a good option because it provides traction whether your bike is dry or wet.
Some pegs are made of metal that is usually coated with rubber. This provides better traction. To many riders, this is the best option.
Others go for plastic or fiber-made pegs. These pegs are lightweight and durable. They provide less traction than others but are still good depending on the surface you ride on.
There are pegs that have a small area base and others with a wide platform base. The wider the base, the more stable it is. It is also easy to get on and get off. Choose the base that is most comfortable for you.
The durability of the peg is important. You need to know if it is going to last for a long time. You don’t want to have to buy one every season.
6. Ease of Use
If the peg is difficult to use, you are going to find it annoying and will avoid using it. There should be no challenges in using it. It should be easy to install and remove the pegs.
The pegs should be strong and sturdy. The surface should not be slippery. You want to be able to grip the surface without slipping and falling.
7. Cable retainer
There are pegs that have a cable retainer. This is a good feature because it retains the brake or gear cable. This prevents it from moving around.
You don’t want to spend a lot of money on a pair of pegs that are going to break or fall apart. You want to know what you are getting for the money. You do not want to waste your money on a cheap product that is not going to perform well.
What Safety Precautions Should You Take?
While mountain bike pegs are a cool way to make your bike look unique, you should know about some important safety precautions.
Before you add pegs to your bike, you should make sure that you have the proper safety gear. This includes a helmet and gloves. Padded clothing is also recommended.
Mountain bike pegs can be slippery, especially when you are riding off-road. This is especially true if you are having to ride over wet or muddy terrain.
These pegs are not the most stable of accessories. If your bike tips over, don’t be surprised if the peg comes loose.
When installing your mountain bike pegs, make sure that you do it properly. They should be seated securely and should not wobble when you ride.
When you are attaching them, check to make sure that the screws will not come loose. Some screws can be overtightened, which can result in stripping. This can be dangerous.
Make sure that the bike pegs you choose are the right size for your bike. A peg that is too big can easily come loose.
There are also pegs out there that will not fit your bike, so measure them before you purchase them.
Finally, take time to choose the right pegs for your bike. This will ensure that they will look right when you are done.
Why Would You Want to Put Pegs on Your Mountain Bike?
People add mountain bike pegs to their bikes for a variety of reasons. Some people are interested in increasing the amount of control that they have over their bikes.
When you have mountain bike pegs, you can have a better sense of balance. This can also make your bike feel lighter when you are riding.
Other people add mountain bike pegs to make it easier to mount and dismount from their bikes.
Sometimes, you may be in an area where you will be taking your bike off into the woods. With these pegs, you can easily get off of your bike and maneuver it over roots and small rocks.
They also provide additional traction when you are riding off-road. Finally, mountain bike pegs can be found in a variety of materials. They come in all shapes and sizes as well.
Therefore, some people add mountain bike pegs just for decoration purposes. If you feel that you have a vintage cruiser bicycle, for example, then you might want to add some pegs to your bike to make it look more authentic.
In this article, we’ve discussed how to make a mountain bike, friendly and safe. We’ve explained why you would want to put pegs on your bike and what precautions you should take when mounting pegs on your bike.
All in all, pegs are a fun addition for anyone that rides off-road and are usually a very easy upgrade to perform. It won’t take you more than a few hours, and you’ll have the satisfaction of knowing you have the coolest bike on the trail.
Now, let’s ask the most important question of all: How informative this article was for you & Do you have any further questions? Please share your thoughts in the comments section.
- Do mountain Bikes Have a Weight Limit?
- Are mountain bikes good for long-distance?
- Why Are Mountain Bike Seats So Hard?
- Best Mountain Bikes For Older Riders
- Should I Go Tubeless On My Mountain Bike?
- Can You Ride A Mountain Bike On The Road?
As much as I remember, I started cycling when I was 5 years old. So I got to know that the passion for riding it runs through my blood but buying the right bicycling equipment and trustworthy information is another story. Always betrayed by sellers and even by friends so I decided to revolutionize it. When choosing bicycling products, I evaluate user’s experiences, different forum discussions, and other social media debates. I do in-depth research on every topic I publish to share with you the most valuable and trustworthy information. Read more about the way I choose the best cycling products and my transformation journey from riding it as a hobby to becoming my passion.