Are Electric Bike Kits Any Good?

Electric bikes are becoming more and more popular, as people try to find ways to save money on gas and be more environmentally friendly. One option that is gaining popularity is electric bike conversion kits, which allow you to convert a traditional bicycle into an electric one. But are electric bike kits any good?

 If you are considering an electric bike conversion kit, then this comprehensive guide is for you. We will go over everything you need to know to make an informed decision, including the pros and cons of electric bike kits, how much they cost, and where to find the best ones.

Are Electric Bike Kits Any Good?

Can you turn a normal bike into an electric bike using conversion kits?

Yes, you can turn a normal bike into an electric bike using conversion kits. A conversion kit is an engine that is mounted on a special tire of a motorcycle. The engine is powered by a battery, ideally a lithium-ion type. The battery is connected to the engine via a motor, which makes the bike move. 

You can control the speed of the bike by using a throttle on the handlebar. The battery has a range of around 50 to 100 miles, depending on the size of the battery. Many kits include an LCD, which displays some of the settings as well as the battery life

Depending on the kit you select, you may have access to traditional information. On most systems, the LCD is attached to the handlebar grips of your bike, giving you easy access to all of the switches and options.

Steps for converting a regular bike into an electric bike

When it comes to motor installation, each kit will differ slightly because each brand does things and has different systems, but the principle is the same across the board.

As a result, it’s best to think of this as a general fact sheet and guide

1st step: Choose the kit

Choose your kit and relevant components based on your cycling goals and uses. Low-speed conversion kits, which are for commuting and leisure. High-speed conversion kits, which are for racing and speed. Hybrid kits, which are for both commuting and racing.

2nd step: Install the motor

Install the motor in the place after reading the user manual. The manufacturer should provide the guidelines and spend more time following these steps. A front-wheel version will instruct you to swap out the front wheel and connect the motor, as well as any additional components such as wires. If you are using a mid-driver motor, it’s usually attached to the frame with a bracket. Whether you are using a rear-wheel or front wheel hub motor you should place your motor in the place.

3rd step: Install the switches:

After installing the motor, it’s time to install the switches. You want the switches to be close to each other and on the handlebars, ideally near the gears and brakes, so you can easily push them to achieve a variety of speeds. To install the switches you will most likely need a screwdriver. Join the wires to the motor, Use zip ties to dress up the components.

4th step: Enjoy your new steed

After you finish your new electric bike, take it for a test ride. Take your time, and don’t be afraid to make changes. It’s best to ride on the flat first, then on hills, and then on roads, until you find the best combination of speed and riding style.

Is it worth converting a bike into an e-bike?

An electric bike conversion kit is a good investment. Kits are less expensive than purchasing a new e-bike. This allows you to spend more money on a more powerful, higher-quality conversion kit. They are typically simple to mount with a few tools and even new e-bikes frequently require some assembly.

Pros and Cons of electric bike conversion kits

Pros

There are a lot of pros to electric bike conversion kits and some of them are mentioned below:

No need to sell old bikes: There’s no need to sell your old bike. You can keep it if you use a conversion kit.

Less Expensive: You can get an electric bike conversion kit for much less than purchasing a new e-bike.

Simple to install: Electric bike conversion kit is easy to install and has few parts so you won’t feel any problems or difficulty while installing it.

Clear instructions: The instructions are very clear and most of the time, all of the tools required are included, so you can ride in no time.

One-year warranty: A conversion kit is frequently accompanied by at least a one-year warranty.

Are Electric Bike Kits Any Good?

Cons

Following are the cons of using e-bike conversion kits:

Less powerful: Even though the bicycle’s performance has improved, it still does not have the same feel as an electric bike.

Make your bike heavier: Your bike will gain weight as a result of the motor and battery box. This can make it more difficult to move it around, carry it upstairs, onto trains, and so on.

Tire deflate faster: You may notice the tire deflates faster than used to. Nothing out of the ordinary just add an extra PSI or two per week due to the added weight of the motor.

Final Thoughts

Conversion kits are useful to convert an ordinary bicycle into an electric bicycle. They are less expensive than purchasing a new e-bike, and they allow you to keep your old bike. It is the best option if you want to save money to upgrade your bicycle’s performance. 

However, you should be aware of the drawbacks before you decide to make the conversion. You will still need to make some changes to the frame and possibly the wheels. The kit may not be as powerful as a new e-bike. 

Hence in this article, we have discussed the way to install a conversion kit and also explained the pros and cons of electric bike conversion kits. So if you are interested in converting your bike into an electric bike, you can start with the above information and make your choice. 

We hope this guide will help you to make the right decision. If you have any questions, you can leave them in the comments section below.

Leave a Comment